*SALE* Six Piece Door Moulding Kit
SALE-6PC-DMK-11-DIY
$ 129.99 $ 169.99
| /
* We've been receiving a lot of questions! 😊 If the size and finish needed are unavailable, we’ve sold out of our clearance mouldings. Please visit the regular-priced Six Piece Door Moulding Kit page for additional door moulding sizes and finish options. Moulding profiles are the same, so sale and regular-priced kits can be mixed and matched! If you have any questions, feel free to email CustomerCare@LuxeArchitectural.com or call us at 800-490-LUXE (5893) M-F 9:00 am - 5:30 pm PST. *
Description
~ Get the custom, high-end, raised paneled look quickly and easily with our patent-pending, self-adhering, door moulding kits for flat panel doors! ~
Our professional-grade wood frames arrive assembled and with our special pre-applied adhesive on the back.
All you have to do is:
- measure/mark (instructions and worksheet included)
- remove the protective backing from the adhesive
- attach to your door
- for permanent, seamless application caulk around all edges
Voilà! An instant transformation! There's no noise, power tools, gluing, nails, or nail holes to patch and sand- we've done all the work for you! Simply paint any desired color or medium to dark stain depending on the finish option selected. "It's easy to add a little luxe in your home!"
***These Moulding Kits are discounted because the adhesive on the back is expired, these kits must be caulked in place. All profiles are the same across the entire website, so feel free to mix and match!***
Finish Options
DIY/PRIMED: Our pre-assembled DIY moulding kits are professionally made in the USA from Pine that has been domestically grown, milled and factory-primed. Miters are glued and underpinned using V-Nails, which means no visible nail holes or patching! The entire frame is hand sanded for a smooth finish and our special adhesive is pre-applied on the back, eliminating the need for nails or glue! DIY Moulding Kits may require minor patching/sanding of small imperfections in the wood. Touch-up primer may be needed at some hand-sanded areas - OR - easier yet, use a "two-in-one" primer and paint.
Finished/Primed: Our primed moulding kits are ready for installation! Professionally made in the USA from factory-primed finger-joint pine, miters are glued and nailed, minor imperfections and nail holes are patched, the whole frame is then lightly sanded, and of course, our special adhesive is pre-applied for you, eliminating the need for nails or glue!
Size Recommendations
OR
{includes: 2- 12" x 9" (top sections) and 4- 12" x 24" (middle & bottom sections)}
*In rare cases, especially with older exterior doors, the hardware is not installed in a standard location. Measure from the edge of your door to the center of the knob. Typically this measurement should be approximately 2 3/8”. If your measurement exceeds 2 3/8”, you may need to order your kit one size down so the moulding does not interfere with the hardware. If you have any questions, please feel free to call us! 800.490.5893 (LUXE)
WARNING: For California Residents - Cancer & Reproductive Harm - 
