SALE — Three Piece Door Moulding Kit

Because this is our DIY finish, minor natural imperfections in the wood and small pin-nail holes at the miters may require light patching or sanding. Some hand-sanded areas may also need touch-up primer before painting. 

For an easier finish, a quality paint-and-primer-in-one may be used where appropriate. 

DIY/Primed Installation 

Stain Grade Premium Poplar Clearance Kits 

The same premium hardwood and craftsmanship, offered at a special price. 

Our Stain Grade mouldings are handcrafted from premium Poplar hardwood that is domestically grown and custom-milled in California. 

The mitered corners are glued and secured from the back with V-nails, leaving no visible nail holes to patch. Each fully assembled moulding is lightly hand-sanded and arrives ready to stain, prime and paint, or finish with milk paint. 

The only reason these Stain Grade Poplar kits are discounted is that the pre-applied adhesive has expired. 

For this reason, the Stain Grade option is intended for permanent, caulk-in-place installation rather than installation using the adhesive alone. 

Stain Grade Poplar Installation 

A Classic Three-Panel Design 

The Three Piece Door Moulding Kit was designed to give a flat panel door the proportion and character of traditional raised-panel millwork. 

The tall upper moulding creates an elegant focal point, while the narrow center and lower mouldings add balance and architectural detail. 

This design works beautifully on: 

What’s Included 

Each Three Piece Door Moulding Kit includes three fully assembled mouldings: 

The moulding width is determined by the selected kit size. 

Every piece arrives fully assembled by our finish carpenters. 

There is no: 

We complete the detailed carpentry work before the mouldings arrive at your door. 

Size Recommendations 

28” × 80” Door 

Choose the 18” Door Moulding Kit. 

Includes: 

30” × 80” Door 

Choose the 20” Door Moulding Kit. 

Includes: 

32” × 80” Door 

Choose the 22” Door Moulding Kit. 

Includes: 

34” × 80” Door 

Choose the 24” Door Moulding Kit. 

Includes: 

36” × 80” Door 

Choose the 26” Door Moulding Kit. 

Includes: 

Before Choosing Your Size 

This design works best with a door knob rather than a lever-style handle because of the placement and profile of the center moulding. 

Door hardware is not always installed in a standard position, particularly on older or exterior doors. 

Before ordering, measure from the edge of the door to the center of the knob. This measurement is typically approximately 2⅜”. 

If the measurement exceeds 2⅜”, consider ordering one size smaller to help prevent the moulding from interfering with the hardware. 

We also recommend checking the placement of deadbolts, decorative plates, mail slots, and any other door hardware before selecting your kit size. 

Why Stain Grade Poplar? 

Poplar has long been valued by woodworkers and finish carpenters for its versatility, workability, and ability to take on a beautifully custom finish. 

It gives you the freedom to create a look that feels completely at home in your space—whether that means a rich stained finish, a soft milk-painted look, or a clean painted finish. 

Our Stain Grade Poplar: 

Because Poplar is a natural hardwood, the color and tone will vary from piece to piece. These variations are part of the warmth and character of real wood. 

For the easiest and most even result, we recommend staining or finishing the mouldings before installation. 

Available Sizes and Finishes 

Clearance inventory is limited and may vary by moulding width and finish. 

If the size or finish you need is no longer shown, it has sold out at the clearance price. 

For additional door sizes and current finish options, please visit our regularly priced Three Piece Door Moulding Kit product page. 

Installation Guidance 

These mouldings are designed for flat panel doors with a clean, stable surface. 

Before installation: 

For ordering guidance, installation demonstrations, surface preparation, and caulking tips, please visit our How-To Videos. 

Real Wood Makes a Real Difference 

Every Luxe Architectural® moulding kit is made from real wood—never MDF, plastic, PVC, foam, or polystyrene. 

Real wood brings warmth, depth, and architectural presence to a door in a way synthetic materials cannot quite reproduce. It can also be painted, stained, sanded, repaired, refinished, and enjoyed for years to come. 

Our mouldings are handcrafted by finish carpenters in our California facility. 

It is real architectural detail, made from a material worthy of your home. 

Perfect For 

The Three Piece Door Moulding Kit is a beautiful choice for: 

Shipping 

Door moulding kits ship fully assembled and are carefully packaged to help protect the craftsmanship in transit. 

Shipping is calculated at checkout based on your location and package size. 

Questions About Your Door? 

We are real people, and we are always happy to help. 

Need guidance choosing the right size, finish, or placement around your door hardware? Reach out before ordering, and we will be happy to walk through your measurements with you.