Two Piece Self-Adhering Door Moulding Kit

$ 49.99


Description

Also Available for 8' Tall Doors!

~ Get the custom, high-end, raised panel look quickly and easily with our Patent Pending, self-adhering door moulding kits for flat panel doors! ~

To install your door moulding kit, all you have to do is:
    • measure/mark (instructions and worksheet included)
      • remove the protective backing from the adhesive
      • attach to your door (for permanent application caulk around the edges)


      Voilà! An instant transformation! There’s no noise, power tools, gluing or nails required- Just caulk around the edges. “It’s easy to add a little luxe in your home!"

      Finish Options

      DIY: At a savings of 35% over our original finished/primed kits, our pre-assembled DIY moulding kits are professionally made in the USA from wood that has been factory-primed by the milling company; miters are glued and nailed, and our special adhesive is pre-applied on the back. DIY Moulding Kits require minor patching/sanding of small imperfections in the wood and small pin-nail holes at the miters. Touch-up primer will be needed at some hand-sanded areas - OR - easier yet, use a "two-in-one" primer and paint.

      DIY/PRIMED: At a savings of 25% over our original finished/primed kits, our pre-assembled DIY/Primed moulding kits are professionally made in the USA from high-quality wood moulding that has been factory-primed by the milling company; miters are glued and nailed, the entire frame is hand-sanded for a smooth finish, and our special adhesive is pre-applied on the back, eliminating the need for nails or glue!. DIY/Primed Moulding Kits may require minor patching/sanding of small imperfections in the wood before painting.

      PRIMER READY:  Our primer-ready kits are professionally made in the USA from wood; miters are glued and nailed, imperfections in the wood and nail holes are patched, and the whole frame is hand-sanded. - All that’s needed is a coat of primer and paint OR - easier yet, use a "two-in-one" primer + paint. As with all of our kits, we pre-apply our special adhesive for easy installation.

      FINISHED/PRIMED- Our primed kits are ready for installation! Professionally made in the USA from wood; they've been factory primed with premium interior/exterior primer, miters are glued and nailed, minor imperfections and nail holes are patched, the whole frame is then lightly sanded, and of course, our special adhesive is pre-applied for you, eliminating the need for nails or glue!

       

      Size Recommendations

      24" x 80" door: 18" Door Moulding Kit

      {includes: 1- 18" x 36" (top section) and 1- 18" x 24" (bottom section)}
      ~
      28" x 80" door: 20" Door Moulding Kit
      {includes: 1- 20" x 36" (top section) and 1- 20" x 24" (bottom section)}
      ~
      30" x 80" door: 22" Door Moulding Kit
      {includes: 1- 22" x 36" (top section) and 1- 22" x 24" (bottom section)}
      ~
      32" x 80" door: 24" Door Moulding Kit
      {includes: 1- 24" x 36" (top section) and 1- 24" x 24" (bottom section)}
      ~
      34" x 80" door: 26" Door Moulding Kit
      {includes: 1- 26" x 36" (top section) and 1- 26" x 24" (bottom section)}
      ~
      36" x 80" door: 26" Door Moulding Kit
      {includes: 1- 26" x 36" (top section) and 1- 26" x 24" (bottom section)}

       

      OR

      26” x 30" Door Moulding Kit

      {includes: 2- 26" x 30" (top and bottom section)} - for newer commercial doors

      OR

      28” Door Moulding Kit*

      {includes: 1- 28" x 36" (top section) and 1- 28" x 24" (bottom section)}

      *In rare cases, especially with older exterior doors, the hardware is not installed in a standard location. Measure from the edge of your door to the center of the knob.  Typically this measurement should be approximately 2 3/8”.  If your measurement exceeds 2 3/8”, you may need to order your kit one size down so the moulding does not interfere with the hardware.  If you have any questions, please feel free to call us! 800.490.5893 (LUXE)

      FOR 8' TALL DOORS

      24" x 96" door: 18" Door Moulding Kit for 8’ (96”) Tall Doors
      {includes: 1- 18" x 52" (top section) and 1- 18" x 24" (bottom section)}
      ~
      28" x 96" door: 20" Door Moulding Kit for 8’ (96”) Tall Doors
      {includes: 1- 20" x 52" (top section) and 1- 20" x 24" (bottom section)}
      ~
      30" x 96" door: 22" Door Moulding Kit for 8’ (96”) Tall Doors
      {includes: 1- 22" x 52" (top section) and 1- 22" x 24" (bottom section)}
      ~
      32" x 96" door: 24" Door Moulding Kit for 8’ (96”) Tall Doors
      {includes: 1- 24" x 52" (top section) and 1- 24" x 24" (bottom section)}
      ~
      34" x 96" door: 26" Door Moulding Kit for 8’ (96”) Tall Doors
      {includes: 1- 26" x 52" (top section) and 1- 26" x 24" (bottom section)}

      Shipping & Returns

      Shipping

      DIY kits ship from our facility within 2-3 business days. The first standard size kit is 19.99 to ship and each additional kit thereafter is 9.99.

      For orders over 20 kits, please contact us for a shipping quote by emailing the size, quantity needed and your exact shipping address to: CustomerCare@LuxeArchitectural.com

      Returns

      Items can be returned within fourteen days of receipt as long as they are in their original condition and not previously installed.

      Please call or email, CustomerCare@LuxeArchitectural.com, to obtain the return address.  Returned items are to be shipped back insured, in the original packaging. As soon as your item(s) are received, a refund will be issued back to the original form of payment, less shipping costs.

      Buyer pays return shipping.

      Custom sizes are not eligible for return / refunds.

      Prop 65 WarningWARNING: For California Residents - Cancer & Reproductive Harm - www.P65Warnings.ca.gov