*SALE* Brooklyn Two Piece Self-Adhering Door Moulding Kit
SALE-2PC-BDMK-24-F/P
$ 72.20 $ 99.99
| /
Description
~ Get the custom, high-end, raised paneled look quickly and easily with our patent-pending, self-adhering, door moulding kits for flat panel doors! ~
Our professional-grade wood frames arrive assembled and with our special pre-applied adhesive on the back.
All you have to do is:
- measure/mark (instructions and worksheet included)
- remove the protective backing from the adhesive
- attach to your door
- for permanent, seamless application caulk around all edges
Voilà! An instant transformation! There's no noise, power tools, gluing, nails, or nail holes to patch and sand- we've done all the work for you! Simply paint any desired color or medium to dark stain depending on the finish option selected. "It's easy to add a little luxe in your home!"
*** PLEASE NOTE: This style works best with a door knob due to the moulding profile
Finish Option
Finished/Primed: Our primed moulding kits are ready for installation! Professionally made in the USA from factory-primed finger-joint pine, miters are glued and nailed, minor imperfections and nail holes are patched, the whole frame is then lightly sanded, and of course, our special adhesive is pre-applied for you, eliminating the need for nails or glue!
Please note these Finished/Primed moulding kits may have some discoloration or scratching but can be easily covered with a coat of paint.
DIY: Our pre-assembled DIY moulding kits are professionally made in the USA from wood that has been factory-primed by the milling company; miters are glued and nailed, and our special adhesive is pre-applied on the back. DIY Moulding Kits require minor patching/sanding of small imperfections in the wood and small pin-nail holes at the miters. Touch-up primer will be needed at some hand-sanded areas - OR - easier yet, use a "two-in-one" primer and paint.
Size Recommendations
*In rare cases, especially with older exterior doors, the hardware is not installed in a standard location. Measure from the edge of your door to the center of the knob. Typically this measurement should be approximately 2 3/8”. If your measurement exceeds 2 3/8”, you may need to order your kit one size down so the moulding does not interfere with the hardware. If you have any questions, please feel free to call us! 800.490.5893 (LUXE)
WARNING: For California Residents - Cancer & Reproductive Harm - 
