If you've ever looked up "picture frame wall moulding" and fallen into a rabbit hole of miter saws, spacing calculators, and conflicting tutorials, you already know the real pain point isn't the installation. It's figuring out what to order. 

How wide should the panels be? How much space between frames? What size looks right on my wall?

That's exactly what the new curated Brooklyn Wall Moulding Collection solves.

What Makes the Brooklyn Collection Different? Shop by Wall Width.

We’ve designed the Brooklyn Collection around a single idea: you shouldn't need to be a designer or finish carpenter to get proportions right.

Every kit in the Brooklyn line is pre-proportioned by wall width. Simply measure the width of your wall, select the corresponding width range, and receive a fully assembled set of real wood moulding frames — sized, spaced, and balanced for your wall. No confusing calculations. No guesswork.

The panel widths, spacing, and layout ratios are calculated to reflect the proportional standards found in professionally designed millwork — a wider center panel anchored by flanking frames, or an alternating rhythm across a longer wall.

The math is already done, just select from our list of available wall width ranges. 

The Three Kits: Which Brooklyn Layout Is Right for Your Wall?

The collection includes three distinct layouts, each designed to cover a specific range of wall widths. Here's how they break down:

Brooklyn Signature Six Piece Wall Moulding Kit

For walls 5' to 12' wide — Starting at $339.99 Shop the Brooklyn Signature →

The Signature is the entry point to the Brooklyn line — and the right choice for most standard rooms. It features wider center panels flanked by narrower panels, a proportional layout that mirrors what you'd see in a professionally designed dining room, bedroom, or office accent wall.

Available wall width ranges:

Panel spacing varies from approximately 3"–8" depending on kit size and wall width. Prefer a more open, airy look with more space between panels? Order the next smaller size layout.

5'–6' wide walls: 12"–24"–12" layout

7'–8' wide walls: 18"–36"–18" layout

9'–10' wide walls: 24"–48"–24" layout

11'–12' wide walls: 36"–48"–36" layout

The Signature includes six fully assembled moulding frames — two center panels (top and bottom) and four side panels (two top and two bottom)— all arriving peel-and-stick ready from our workshop.

Best for: Living rooms, dining rooms, bedrooms, offices, hallways, and entryways.

Brooklyn Reserve Ten Piece Wall Moulding Kit

For walls 11' to 17' wide — Starting at $689.99 Shop the Brooklyn Reserve →  

The Brooklyn Reserve Ten Piece Kit is designed for longer walls that require additional coverage. The layout extends the Signature concept: wider center panels flanked by four narrower columns — two on each side — creating a symmetrical, architectural look across longer walls.

Available wall width ranges:

Panel spacing varies from approximately 3"–10" depending on kit size and wall width. Prefer a more open, airy look with more space between panels? Order the next smaller size layout.

11'–14' wide walls: 18"–18"–36"–18"–18" layout

14'–17' wide walls: 24"–24"–48"–24"–24" layout

With ten fully assembled frames, the Reserve fills an open wall the way a custom carpenter would — with deliberate rhythm and proper spacing.

Best for: Great rooms, open-plan living spaces, larger dining rooms, primary bedrooms with long feature walls, and multi-unit residential projects.

Brooklyn Estate Ten Piece Wall Moulding Kit

For walls 14' to 21' wide — Starting at $799.99 Shop the Brooklyn Estate →

The Estate is our largest Brooklyn layout, built specifically for grand-scale walls. It uses an alternating panel design — three larger panels with two narrow accent panels between them — a rhythm-based approach that prevents oversized walls from feeling heavy or monotonous.

Available wall width ranges:

Panel spacing varies from approximately 3"–10", depending on kit size and wall width. Prefer a more open, airy look with more space between panels? Order one size down.

14'–16' wide walls: 36"–18"–36"–18"–36" layout

16'–19' wide walls: 48"–12"–48"–12"–48" layout

18'–21' wide walls: 48"–24"–48"–24"–48" layout

Best for: Open-concept great rooms, high-end foyers, luxury primary suites, hotel lobbies, and high-value property renovations where the wall is a statement. 

Quick Reference: Which Brooklyn Kit for Your Wall?

Pro Tip: You can use either the Signature or Reserve layouts for 11’ – 12’ long walls or the Reserve or Estate layout for 14'–17’ long walls

How Installation Works — No Power Tools Required

Every kit in the Brooklyn collection installs the same way using our patent-pending self-adhering system. Each moulding frame arrives fully assembled — mitered corners, V-nail fastened, hand-sanded, and DIY options all shipped with pre-applied adhesive on the back.

The installation process is three steps:

Peel — Remove the protective backing from the pre-applied adhesive.

Place — Position the frame on your wall. You can reposition before pressing.

Press — Apply firm pressure along all edges to secure.

After installation, run a bead of paintable latex caulk along all edges (we recommend Alex Plus by DAP), then paint your chosen color. That's it.

No saw. No nail gun. No compressor. No carpentry experience needed. No dust or noise. It’s clean, quick, and easy, start to finish.

Watch step-by-step installation on our YouTube channel

Three Finish Options for Every Project Type

DIY / Primed Budget-friendly, factory-primed Pine. Ready for paint. May require light sanding or minor patching. Great for painted accent walls where you want to keep costs in check.

Stain Grade / Primer Ready — Premium Hardwood Poplar Clear Poplar hardwood, sustainably sourced and milled in North America. Accepts stain, paint, milk paint, and specialty finishes. Stain before installation, then finish with a clear latex caulk. For anyone who wants a natural wood finish or a deep, rich paint color on a true hardwood moulding.

Finished / Primed Factory-coated with a thick, durable primer. Miters filled, imperfections patched, surface sanded smooth. The most installation-ready option — just install, caulk, and paint. No prep work required.

All three are handcrafted in the USA by our finish carpenters.

Made in the USA. Handcrafted by Finish Carpenters.

This isn't foreign MDF, plastic, or foam, nor is it wrapped in a synthetic film. Every moulding in the Brooklyn Collection, and all of our door and wall moulding kits are made from real wood, in our US facility, by our finish carpenters. Miters are cut precisely, glued, and fastened with V-nails so there are no visible nail holes. Edges are hand-sanded. The self-adhering backing is applied to each kit before it ships.

The result is a moulding frame with the quality you'd expect from a professional carpenter — at a fraction of the cost and without noise or mess.

For Trade Accounts: Contractors, Designers, and Property Investors

The Brooklyn Collection is a strong fit for trade professionals working on multiple properties or client projects. The order-by-wall-width system is particularly useful when you're specifying moulding across different rooms and floor plans — no custom measuring, no per-project layout calculations. Select the wall width, select the finish, and place the order.

If you're ordering for multiple units or larger projects, we offer Trade Accounts with dedicated support. Learn more about our Trade Account program.

For large-format kits (36" panels and above), we can offer the option to ship unassembled to help reduce shipping costs. Please contact us before placing your order.

Not Sure Which Size Is Right for Your Wall?

Here's how to measure:

1. Measure your wall width.
2. Find your width range in the Quick Reference Guide above.
3. If your wall falls between two ranges, we recommend you select the smaller kit to allow for proper spacing (3"–10").

Designed for 9' ceilings, or 8' ceilings without crown moulding. If you have outlets, switches, thermostats, or vents on the wall, review their placement before ordering. For helpful hints or questions, email a photo to CustomerCare@LuxeArchitectural.com before placing your order — our team is always here to help or call us.

Call us: 800-490-LUXE (5893), Monday–Friday, 9 am–5 pm PT.

Shipping

All Brooklyn kits ship fully assembled and ready to install via UPS/FedEx within 1–3 business days. Shipping rates are calculated at checkout based on kit size and destination. For 36"+ panels, contact us about our unassembled shipping option to reduce freight costs.

Returns are accepted within 14 days of receipt on uninstalled kits in original condition.

Ready to Find Your Kit?

The Brooklyn Wall Moulding Collection covers walls from 5 feet to 21 feet wide or greater with additional pieces — all with the same peel-and-stick installation, the same real wood craftsmanship, and the same result: a feature wall that looks like it was designed and installed by a professional.

→ Shop the Brooklyn Signature (5'–12' walls)

→ Shop the Brooklyn Reserve (11'–17' walls)

→ Shop the Brooklyn Estate (14'–21' walls)

Questions? 800-490-LUXE (5893) | CustomerCare@LuxeArchitectural.com

Luxe Architectural is a women-owned company, our kits are made in the USA, handcrafted by our finish carpenters and are shipped fully assembled and ready to install.

Also in Luxe Architectural ~ Blog Page